Application engineering
IP65+ with IP68 options, high-voltage tolerance, resistor integration, lifecycle validation
Get a recommendation
Sealed detection and locking switches for charging guns, ports, covers, and status mechanisms.
Unionwell supports IP65+ designs, IP68 options, high-voltage tolerance, built-in resistor configurations, and long-life mechanisms where required by the selected model.
Product in the application
Representative mechanisms and sensing points for engineering teams. The series shown are starting points; confirm the exact model, rating, environment, and validation requirements with Unionwell.
Detect button or lock movement and provide a position input to the charging control sequence.
Confirm the position of a compact locking mechanism during connection and release.
Report whether an access cover or service door has reached its intended position.
Provide a door-state input for equipment access monitoring and control interlocks.
Starting platforms
G303R, G9, G23, G25, G26, G307
Recommendations are a starting point only. Final selection requires the mechanism, load, environment, approvals, quantity, and validation plan.Browse product platformsEngineering answers
Use these checks to prepare a clear micro switch RFQ. Final selection depends on the exact assembly and validation requirements.
Typical sensing locations include charging-gun release buttons, connector locking pins, vehicle inlet or port covers, and service-cabinet doors. The switch can report a mechanism position to the equipment control system; the overall charging and interlock design remains a system-level responsibility.
Share the installation location and exposure to water, dust, cleaning, temperature, vibration, and mechanical impact. Also specify the circuit load, switching frequency, required life, actuator geometry, connector constraints, applicable standards, and validation plan.
Start with the lock movement, available space, operating and release positions, force and travel, and the signal or load being switched. Suggested series on this page are candidates for review only; confirm the exact configuration and testing requirements with Unionwell engineering.
Application inquiry
Tell us what the switch detects or controls, how it is actuated, and the operating environment.